For the ladies! NZXT proudly presents the Phantom Big-Tower in pink,
which is intended for the female gamer base. All new Phantoms,
including this variant also come equipped with USB 3.0 connectivity.
Additional features of these enclosures are a five channel fan
controller with 20W load capacity on each circuit, spacious interior,
lighting which may be turned off, elaborate cable management, numerous
anti-vibration measures and a water cooling ready design.
The futuristic design of the NZXT Phantom makes it the perfect basis for
an extravagant gaming PC as the case specialist has included unique
shapes and lines which resembles that of modern high performance sports cars. A front door covers the drive bays, so that the chassis
looks perfect, regardless of what type of drives you have installed.
Besides the pink color option, NZXT also offers a white, black, red and
red/white variant with more special editions in the works.
In terms of cooling, the NZXT Phantom manages to blend form and function
perfectly, as the black mesh elements do not simply look good, but also
allows access to fresh to any installed fan. To keep temperatures down,
two 120 mm fans have been installed in the side panel, pushing cool air
across the hard drive bays, with another one in the rear along with a
large and quiet 200 mm unit in the ceiling pulling air out of the case.
Those wanting even more cooling performance can turn the interior of the
Phantom into a wind tunnel by installing another 200 mm unit in the
ceiling of the chassis and a 140 mm unit in the ceiling as well. In
addition, one may exchange the two 120 mm units with a 200 or 230
variant. To keep things quiet, NZXT has included a high-performance fan
controller with 5 channels and 20W capacity on each circuit.
Dust filters on all intake areas ensure that the interior of the Phantom
stays clean and presentable and that the bottom mounted power supply
life span is kept at a maximum. For drive bays, the case allows for a
slew of drives to be installed as it comes with five 5.25” and seven
3.5” inch drive bays. The chassis can easily be filled with high-end
hardware as the rear hard drive cage may be removed to allow for large
power supplies or components. To make the assembly process as easy as
possible NZXT has employes thumb screws and tool-less locking mechanism
thoughout the entire case.
The complete interior in all four Phantom variants has been painted in
the matching color and the exact same high-end finish as the exterior.
An opening in the mainboard tray gives easy access ot the backplates of
CPU coolers, eliminating the need to remove the entire board from the
chassis. In terms of space, the Phantom allows for large components like
eATX and high-end graphic cards with up to 35 mm length to be
installed. Externally all Phantom variants offer an I/O panel equipped
with USB 2.0 & 3.0, along with a pair of audio connectors and eSATA
port, while the power and reset buttons have been seamlessly integrated
into the overall design of the chassis.
Those interested in water cooling will find that the Phantom manages to
impress in this area as well. The combination of four openings in the
back of the chassis and ability to install a 240 mm radiator in the
ceiling should cater to even the most extreme scenarios. A switch to
deactivate the LED lighting of the included case fan has been embedded
in the rear of the chassis as well.
The USB 3.0 versions of the NZXT Phantom Big-Tower are available
immediately for a price of 139.90 Euro exclusively at www.caseking.de.
Source
Thursday, September 29, 2011
Kingston Digital Introduces New Ultra-Secure DataTraveler 6000 USB Flash Drive
Kingston Digital, Inc., the Flash memory affiliate of Kingston
Technology Company, Inc., the independent world leader in memory
products, today announced the DataTraveler 6000 (DT6000) USB Flash
drive, which protects sensitive data with Federal Information Processing
Standard (FIPS) 140-2 Level 3 Validation and 100-percent encryption.
For financial service organizations and government agencies that need
the strongest data protection in mobile storage device, the DT6000 meets data-at-rest regulations and is the most secure USB Flash drive available on the market.
The Kingston DT6000 utilizes patented Secured by Spyrus technology which supports 256-bit AES hardware-based encryption using XTS block cipher mode. XTS is current generation technology that provides much stronger protection than other block cipher modes such as CBC and ECB. The DT6000 uses ‘military-grade’ elliptic curve cryptography (ECC), which is recommended by the U.S. National Security Agency (NSA) as part of its Suite B set of cryptographic algorithms.
Organizations spend millions of dollars annually on network security to thwart hackers and other outsider threats. A recent study by the Ponemon Institute highlighted that nearly half of organizations surveyed lost sensitive or confidential information on USB drives over the last two years, and that on average 12,000 customer records per organization were lost. For many organizations, steps to protect data on portable devices remain unimplemented for a variety of reasons despite the risks in using unsecured drives in the workplace. Frequent news stories show that security breaches associated with USBs are more often the result of negligence (lost drives) and a lack of security policy, education and enforcement rather than malicious intent. In other words, having an unencrypted USB drive is a potential data breach in one’s pocket.
“While enterprises and government agencies need to be able to provide remote and mobile employees access to sensitive and confidential data, establishing security policies and deploying USB products that prevent data loss is as important and immediate as an organization’s network security,” said John Terpening, Secure USB business manager, Kingston. “Using non-secure USB drives makes organizations vulnerable to data loss and breaches that can affect the company’s credibility with its employees, customers and partners. The DT6000 is the most secure USB Flash drive available and will meet the most stringent corporate or government requirements.”
While other companies concentrate on security around cloud-based services, Kingston keeps its focus on the hardware security side. Our longstanding relationships with controller and NAND Flash suppliers as well as global distribution capabilities ensure a steady supply of products to meet customer needs. Evaluation samples are readily available to potential customers. Along with the DT6000, Kingston has an extensive family of secure DataTraveler USB Flash drives to match the security needs for all levels of enterprises:
The Kingston DT6000 utilizes patented Secured by Spyrus technology which supports 256-bit AES hardware-based encryption using XTS block cipher mode. XTS is current generation technology that provides much stronger protection than other block cipher modes such as CBC and ECB. The DT6000 uses ‘military-grade’ elliptic curve cryptography (ECC), which is recommended by the U.S. National Security Agency (NSA) as part of its Suite B set of cryptographic algorithms.
Organizations spend millions of dollars annually on network security to thwart hackers and other outsider threats. A recent study by the Ponemon Institute highlighted that nearly half of organizations surveyed lost sensitive or confidential information on USB drives over the last two years, and that on average 12,000 customer records per organization were lost. For many organizations, steps to protect data on portable devices remain unimplemented for a variety of reasons despite the risks in using unsecured drives in the workplace. Frequent news stories show that security breaches associated with USBs are more often the result of negligence (lost drives) and a lack of security policy, education and enforcement rather than malicious intent. In other words, having an unencrypted USB drive is a potential data breach in one’s pocket.
“While enterprises and government agencies need to be able to provide remote and mobile employees access to sensitive and confidential data, establishing security policies and deploying USB products that prevent data loss is as important and immediate as an organization’s network security,” said John Terpening, Secure USB business manager, Kingston. “Using non-secure USB drives makes organizations vulnerable to data loss and breaches that can affect the company’s credibility with its employees, customers and partners. The DT6000 is the most secure USB Flash drive available and will meet the most stringent corporate or government requirements.”
While other companies concentrate on security around cloud-based services, Kingston keeps its focus on the hardware security side. Our longstanding relationships with controller and NAND Flash suppliers as well as global distribution capabilities ensure a steady supply of products to meet customer needs. Evaluation samples are readily available to potential customers. Along with the DT6000, Kingston has an extensive family of secure DataTraveler USB Flash drives to match the security needs for all levels of enterprises:
- DataTraveler 4000 ―
Managed (DT4000-M): Awarded highest rating of 5 out of 5 in SC
Magazine’s Portable Security Devices group test (June 2011). Designed
for high-value corporate deployments, the DT4000-Managed provides FIPS
140-2 Level 2 validation and is centrally managed, all at an affordable
cost. Kingston partnered with BlockMaster to provide SafeConsole for
Kingston, enforcing full USB management control over the drive.
- DataTraveler 4000: Same features as DT4000-M but not managed.
- DataTraveler Vault Privacy ― Managed (DTVP-M): Optimal for
sensitive enterprise environments with 256-bit AES encryption and the
SafeConsole for Kingston central management system, which is fully
customizable to meet an enterprise organization’s needs.
- DataTraveler Vault Privacy (DTVP): Same features as DTVP-M but not managed.
- FIPS 140-2 Level 3 Validated
o Ultra-Strong Security Architecture
o Drive locks down after 10 intrusion attempts and encryption key is destroyed
o No passwords stored on device or host
o Hardware designed and assembled in the U.S.
o United States National Security Agency Suite B set of cryptographic on Board
Elliptic curve cryptography
o Secure channel communication
o Digitally signed firmware updates using Suite B SHA-384 and ECDSA P-384
o DT6000 can operate with AutoRun disabled
o Enforces tamper-free AutoRun files
o Cryptography made in the U.S.
- Enforced Complex Password: Password is user-set with a minimum
of three of the four characteristics (lowercase, uppercase, characters
and numbers) required to prevent unauthorized access
- Full Privacy: 100 percent of stored data is protected by
256-bit Advanced Encryption Standard (AES) hardware-based encryption ―
master key recreated at logon
- Customizable: preload content, full security policy customization, casing options
Tamper-Proof Physical Security Barrier
- Waterproof: protected against water damage
- Guaranteed : five-year warranty with 24/7 customer support
- Ruggedized: titanium-coated stainless steel casing
- Dimensions: 3.06" x 0.9" x 0.47" (77.9mm x 22mm x 12.05mm)
- Speed: up to 11MB/s read, 5MB/s write
- Capacities: 2GB, 4GB, 8GB, 16GB
- Compatibility: designed to USB 2.0 specifications
- Operating Temperature: 32ºF to 140ºF (0ºC to 60ºC)
- Storage Temperature: -4ºF to 185ºF (-20ºC to 85ºC)
- Minimum System Requirements:
o USB 2.0 compliant and 1.1 compatible
o Two (2) free consecutive letters required for use
AMD Releases Catalyst 11.9 WHQL
Here's the latest Radeon Catalyst driver suite for all you Radeon graphics card fans! It has one major new feature:
which sounds very cool and is begging to be reviewed and benchmarked, plus quite a few fixes:
Let us know how they work for you, especially the 3D graphics. Competition between AMD and NVIDIA on this front is very welcome.
Driver download
Release notes
Source: AMD
Enables AMD HD 3D technology support on DisplayPort panels, such as the Samsung 750 and 950 series 3D displays
which sounds very cool and is begging to be reviewed and benchmarked, plus quite a few fixes:
Resolved Issues for the Windows 7 Operating System:
This section provides information on resolved known issues in this release of the AMD Catalyst 11.9 software suite for Windows 7. These include:
STALKER – Call of Pripyat no longer hangs randomly when launching a new game or opening a previously saved game.
Scaling options are now correctly displayed when connecting a Digital monitor to the Display port on some video cards.
The following games no longer experience random hangs during game loading :
Call of Duty – Black Ops
F1 2010
Dungeon Siege 3
The following games no longer hang intermittently during gameplay:
Battlefield - Bad Company 2
Borderlands
Dead Rising 2
The following games no longer hangs while running the benchmark :
Serious Sam 2
Resident Evil 5
HAWX 2
HAWX 2 no longer displays random flashing black pixels
Flashing pixel corruption is no longer experienced while playing F1 2010 and Dirt 2
The Windows Event Log no longer reports unwanted Distributed DCOM errors.
Negative Crossfire Scaling is no longer occasionally observed while playing EarthSim 2, Battle – Bad Company 2 , Metro and HAWX
Video corruption is no longer observed while playing full screen HD WMV format files using PowerDVD with Windows Aero Mode turned off.
Blank video playback is no longer observed when hardware accelerations is enabled in VLC 1.1.10
Dawn of War II – Retribution no longer exhibits a black screen when alt-tabbing in and out of the game
Random display corruption is no longer observed when playing WMV format files using Windows Media Player
City of Heroes no longer experiences stuttering after excessive use if in-game Anti-Aliasing slider
Resolved Issues for the Windows Vista Operating System:
This section provides information on resolved known issues in this release of the AMD Catalyst™ 11.9 software suite for Windows Vista. These include:
The screen no longer goes black on when the Aero Desktop is enabled on some Radeon products.
Lost Planet 2 no longer randomly crashes when running the benchmark
Resolved Issues for the Windows XP Operating System:
This section provides information on resolved known issues in this release of the AMD Catalyst™ 11.9 software suite for Windows XP. These include:
Enemy Territory – Quake Wars no longer displays random screen corruption
Cyberlink PowerDVD no longer hangs when attempting to play a BluRay disc.
Known issues under the Windows 7 operating system:
The following section provides a summary of open issues that may be experienced under the Windows 7 operating system in the latest version of AMD Catalyst™. These include:
The display may freeze after playing HD Videos over an extended period of time using Windows Media Center
Random screen tearing may be observed while playing Portal 2
Random screen corruption may be observed while playing Wolfenstein in multiplayer mode
Random corruption may be experienced while playing Enemy Territory – Quake Wars
Choppy playback may be experienced during playback of interlaced DVD content in full screen mode using PowerDVD 11
Known Issues under the Windows Vista Operating System:
The following section provides a summary of open issues that may be experienced under the Windows Vista operating system in the latest version of AMD Catalyst™. These include:
Windows Aero options may not be available after installing the driver
Let us know how they work for you, especially the 3D graphics. Competition between AMD and NVIDIA on this front is very welcome.
Driver download
Release notes
Source: AMD
Prolimatech Announces Panther CPU Cooler
Prolimatech presents the Panther, their newest CPU cooler aimed to take
the mid-range by storm, while featuring the same excellent quality as
all products from Prolimatech. Besides the mounting for all modern AMD
and Intel
based systems, the Panther CPU cooler also includes a 120 mm fan with
PWM functionality. This complete package manages to impress with an
excellent price/performance ratio.
Prolimatech has set the bar with the high-end Genesis cooler, so it is only natural that the company takes their experience and engineering capabilities and develop the Panther, a potent solution for the mainstream market. The Panther utilizes less material in the most efficient manner possible, keeping a maximum of surface area while offering compact dimensions. It is also the first CPU cooler from Prolimatech which ships with a fan.
Prolimatech has taken its inspiration for this new cooler from the Armageddon, which results in the same excellent performance at a brand new price point. Both feature the same heatpipe shape, with the only difference being the number of such element as the Panther offers four 6 mm pipes.
In terms of construction, the cooler makes no compromises and offers the same level of quality as one has come to expect from Prolimatech. High quality Nickel plating has been applied to the entire cooler which does not only protect the unit but also results in a great look and feel. On top of that, the crossed fins increase the robustness of the Panther cooler.
The sophistication of this construction also shows in the shape of the heatpipes. These end in a row next to each other, so that each of them has unrestricted access to the fresh airflow of the included fan. This maximizes the efficiency of the Panther CPU cooler, while keeping the dimensions to a minimum.
The 120 mm fan with PWM connector can be controlled automatically by every modern mainboard in the market to keep the noise to a bare minimum. This cooling unit also features transparent red blades along with red LEDs. Prolimatech has also included a second set of clips, allowing the installation of another such fan for a push/pull configuration, further raising the performance bar on this cooler. Also part of the package is the award winning PK-1 thermal past and the very sturdy mounting kit with backplate for Socket 1155, 1156, AM2, AM2+ and AM3.
The Prolimatech Panther CPU cooler is available immediately for a price of 39.90 Euro on www.caseking.de.
Source
Prolimatech has set the bar with the high-end Genesis cooler, so it is only natural that the company takes their experience and engineering capabilities and develop the Panther, a potent solution for the mainstream market. The Panther utilizes less material in the most efficient manner possible, keeping a maximum of surface area while offering compact dimensions. It is also the first CPU cooler from Prolimatech which ships with a fan.
Prolimatech has taken its inspiration for this new cooler from the Armageddon, which results in the same excellent performance at a brand new price point. Both feature the same heatpipe shape, with the only difference being the number of such element as the Panther offers four 6 mm pipes.
In terms of construction, the cooler makes no compromises and offers the same level of quality as one has come to expect from Prolimatech. High quality Nickel plating has been applied to the entire cooler which does not only protect the unit but also results in a great look and feel. On top of that, the crossed fins increase the robustness of the Panther cooler.
The sophistication of this construction also shows in the shape of the heatpipes. These end in a row next to each other, so that each of them has unrestricted access to the fresh airflow of the included fan. This maximizes the efficiency of the Panther CPU cooler, while keeping the dimensions to a minimum.
The 120 mm fan with PWM connector can be controlled automatically by every modern mainboard in the market to keep the noise to a bare minimum. This cooling unit also features transparent red blades along with red LEDs. Prolimatech has also included a second set of clips, allowing the installation of another such fan for a push/pull configuration, further raising the performance bar on this cooler. Also part of the package is the award winning PK-1 thermal past and the very sturdy mounting kit with backplate for Socket 1155, 1156, AM2, AM2+ and AM3.
The Prolimatech Panther CPU cooler is available immediately for a price of 39.90 Euro on www.caseking.de.
Source
ASUS Unveils Trio of PCI-Express 3.0 Motherboards Based on Intel Z68 Chipset
ASUS unveiled a trio of socket LGA1155 motherboards based on the Intel
Z68 chipset, which feature PCI-Express 3.0 x16 slots (electrical x8/x8
when both are populated). The new motherboards are PCI-Express Gen 3.0
specifications compliant, complete with switches and electrical
components. Leading the pack is the P8Z68 DELUXE/Gen3 in the
$250-segement, followed by the P8Z68-V PRO/Gen3 in the $200-segment, and
the P8Z68-V/Gen3 in the sub-$200 segment.
All three feature 16-phase Digi+ CPU VRM, an Intel-made gigabit Ethernet controller, and Lucid Virtu support. All three feature the same expansion slot loadout, with two PCI-Express 3.0 x16 (x16/NC or x8/x8), one PCI-Express 2.0 x16 (electrical 2.0 x4), and two each of PCI-Express 2.0 x1 and legacy PCI wired to an ASMedia-made bridge chip.
The P8Z68 DELUXE/Gen3 is loaded with features, but lacks display connectivity, the bundled Lucid Virtu only works in D-mode, providing load-balancing between multiple installed GPUs. The lack of display connectors creates room for an additional gigabit Ethernet + USB 3.0 port cluster. The second gigabit Ethernet connection is controlled by Realtek 8111E. A PLX-made PCI-Express 2.0 bridge chip is used to create additional PCI-Express 2.0 x1 internal ports, driving additional USB 3.0 and SATA controllers. While the other two boards in this series use ASMedia-made USB 3.0 controllers, the P8Z68 DELUXE/Gen3 uses NEC/Renesas-made ones. Other connectivity includes HD audio, Bluetooth 3.0, and FireWire.
The P8Z68-V PRO/Gen3 is a tiny step down in terms of connectivity options, it gets rid of the RTL8111E-driven gigabit Ethernet connection the DELUXE variant has, makes room for iGPU display connectivity including DVI, HDMI, and D-Sub, and has one fewer eSATA port. The P8Z68-V/Gen3 is even slimmer, its HD audio CODEC lacks DTS decode feature, and it has two fewer SATA 6 Gb/s ports.
Source: TechConnect Magazine
All three feature 16-phase Digi+ CPU VRM, an Intel-made gigabit Ethernet controller, and Lucid Virtu support. All three feature the same expansion slot loadout, with two PCI-Express 3.0 x16 (x16/NC or x8/x8), one PCI-Express 2.0 x16 (electrical 2.0 x4), and two each of PCI-Express 2.0 x1 and legacy PCI wired to an ASMedia-made bridge chip.
The P8Z68 DELUXE/Gen3 is loaded with features, but lacks display connectivity, the bundled Lucid Virtu only works in D-mode, providing load-balancing between multiple installed GPUs. The lack of display connectors creates room for an additional gigabit Ethernet + USB 3.0 port cluster. The second gigabit Ethernet connection is controlled by Realtek 8111E. A PLX-made PCI-Express 2.0 bridge chip is used to create additional PCI-Express 2.0 x1 internal ports, driving additional USB 3.0 and SATA controllers. While the other two boards in this series use ASMedia-made USB 3.0 controllers, the P8Z68 DELUXE/Gen3 uses NEC/Renesas-made ones. Other connectivity includes HD audio, Bluetooth 3.0, and FireWire.
The P8Z68-V PRO/Gen3 is a tiny step down in terms of connectivity options, it gets rid of the RTL8111E-driven gigabit Ethernet connection the DELUXE variant has, makes room for iGPU display connectivity including DVI, HDMI, and D-Sub, and has one fewer eSATA port. The P8Z68-V/Gen3 is even slimmer, its HD audio CODEC lacks DTS decode feature, and it has two fewer SATA 6 Gb/s ports.
Source: TechConnect Magazine
Intel Intros New Z68-based Extreme Series Desktop Boards
The DZ68BC is a completely new design that is tailored for the Z68 chipset, complete with overclocking features, as well as display connectivity. The CPU is powered by an 8-phase digital PWM VRM, makes use of improved VRM cooling, expansion slots include two PCI-Express 2.0 x16, three PCI and two PCIe x1, storage connectors consist of four SATA 6 Gb/s, four SATA 3 Gb/s, and two eSATA. There's 8-channel HD audio, Intel GbE connections, display IO that includes DVI, D-Sub, and HDMI, USB 3.0, and possibly FireWire. Lucid Virtu comes bundled, that provides active switching between the integrated and discrete GPUs.
Source: VR-Zone
Firefox in Warp Zone, Updated to Version 7.0
A little over a month after releasing Firefox 6.0, and quickly following
it up with two minor updates (6.0.1 and 6.0.2), Mozilla released its
next "major" version, Firefox 7.0 into the release channel. It is now
clear that Mozilla Firefox is playing catch-up with other popular
web-browsers in some sort of a version number game. The three year old
Google Chrome is already into version 14, with version 16 already in the
dev channel.
While Firefox users will not be in for a different user interface (it's bad to drastically change it from time to time), Firefox 7 does seem to come with several under-the-hood changes. To begin with, the Windows version features a brand-new rendering back-end that speeds up Canvas, a tweaked Sync system that instantly syncs changes to bookmarks and saved passwords, support for text-overflow: ellipsis, compliance with the Web Timing specification, WebSocket protocol updated from version 7 to 8, and improved support for MathML. The only UI change is that the protocol of the page loaded is hidden. The full URL will be copied when you copy the address in the bar. Firefox 7 is launched for all platforms it's available in: Windows, Mac, Linux, and Android.
DOWNLOAD: Mozilla Firefox 7
While Firefox users will not be in for a different user interface (it's bad to drastically change it from time to time), Firefox 7 does seem to come with several under-the-hood changes. To begin with, the Windows version features a brand-new rendering back-end that speeds up Canvas, a tweaked Sync system that instantly syncs changes to bookmarks and saved passwords, support for text-overflow: ellipsis, compliance with the Web Timing specification, WebSocket protocol updated from version 7 to 8, and improved support for MathML. The only UI change is that the protocol of the page loaded is hidden. The full URL will be copied when you copy the address in the bar. Firefox 7 is launched for all platforms it's available in: Windows, Mac,
DOWNLOAD: Mozilla Firefox 7
Wednesday, September 28, 2011
PC Gaming to Overtake Consoles Gaming by 2014
Console gamers have long mocked their PC brethren, saying that we
were living in a post PC gaming era. However, a new report by DFC
Intelligence, commissioned by Nvidia, says that PC gaming revenue is set
to overtake that of consoles by 2014.
This report also mentioned that current generation PCs are 10x as powerful as the current generation of consoles. Although we don’t have access to the full report, the below graphics tell enough of a story.
What do you think?
This report also mentioned that current generation PCs are 10x as powerful as the current generation of consoles. Although we don’t have access to the full report, the below graphics tell enough of a story.
What do you think?
EA Posts Recommended System Specification for Battlefield 3
EA has posted the recommended system specs for Battlefield 3 over on the beta website:
OS: WINDOWS 7 64-BIT
PROCESSOR: QUAD-CORE CPU
MEMORY: 4 GB
HARD DRIVE: 20 GB
GRAPHICS CARD: DIRECTX 11 COMPATIBLE WITH 1024 MB RAM (NVIDIA GEFORCE GTX 560 OR ATI RADEON 6950)
SOUND CARD: DIRECTX COMPATIBLE
KEYBOARD AND MOUSE
DVD ROM DRIVE
OS: WINDOWS 7 64-BIT
PROCESSOR: QUAD-CORE CPU
MEMORY: 4 GB
HARD DRIVE: 20 GB
GRAPHICS CARD: DIRECTX 11 COMPATIBLE WITH 1024 MB RAM (NVIDIA GEFORCE GTX 560 OR ATI RADEON 6950)
SOUND CARD: DIRECTX COMPATIBLE
KEYBOARD AND MOUSE
DVD ROM DRIVE
Cooler Master Announces Hyper TX3 EVO and Hyper 212 EVO CPU Coolers
Cooler Master, an industry leading chassis, thermal solution,
peripheral, and accessory manufacturer, signals the rebirth of two
household names in computing, the Hyper 212 EVO and Hyper TX3 EVO CPU
Coolers. They come packed with an improved tower fin design, heat pipe
layout, upgraded fans, and fan brackets. All of which provides an even
more extreme value for end-users of all types.
Improved Cooling Design
The Hyper 212 & TX3 EVO cooling systems are designed and optimized to provide the best user experience and cooling potential for a new generation of processors. The Hyper 212 EVO now features four Cooler Master patented Continuous Direct Contact (CDC) heat pipes that are tightly packed into a flat array on the CPU Cooler base. This acts as a virtual vapor chamber that dissipates a large amount of heat. The aluminum fin structure has been optimized to provide the perfect performance balance between high and low speed fan operations.
Optimized for current and future generation sockets, the Hyper TX3 EVO sees improvement in its Direct Contact heat pipe performance, expanded socket support, and a higher quality 92mm wide-range PWM fan.
Simple Installation / Dual Fan Design
A high performance PWM fan with anti-vibration rubber pads and a set of quick-snap brackets are included with each CPU cooler. In addition, an extra set of quick-snap brackets and anti-vibration rubber pads come standard to give users the option of enabling even greater cooling performance by installing another fan. The quick-snap brackets make changing, adding, and cleaning fans an easy task that requires only a few seconds. Dynamically control the included PWM fan via BIOS or OS-based motherboard tuning applications. There is no need to choose between overclocking performance and stock stability, the Hyper 212 & TX3 EVO are a versatile pair that tailor noise and performance to any need.
Find the new legend, the Hyper 212 & TX3 EVO, at online and retail locations that sell your favorite Cooler Master, CM Storm, and Choiix products. They will be available in October 2011.
Improved Cooling Design
The Hyper 212 & TX3 EVO cooling systems are designed and optimized to provide the best user experience and cooling potential for a new generation of processors. The Hyper 212 EVO now features four Cooler Master patented Continuous Direct Contact (CDC) heat pipes that are tightly packed into a flat array on the CPU Cooler base. This acts as a virtual vapor chamber that dissipates a large amount of heat. The aluminum fin structure has been optimized to provide the perfect performance balance between high and low speed fan operations.
Optimized for current and future generation sockets, the Hyper TX3 EVO sees improvement in its Direct Contact heat pipe performance, expanded socket support, and a higher quality 92mm wide-range PWM fan.
Simple Installation / Dual Fan Design
A high performance PWM fan with anti-vibration rubber pads and a set of quick-snap brackets are included with each CPU cooler. In addition, an extra set of quick-snap brackets and anti-vibration rubber pads come standard to give users the option of enabling even greater cooling performance by installing another fan. The quick-snap brackets make changing, adding, and cleaning fans an easy task that requires only a few seconds. Dynamically control the included PWM fan via BIOS or OS-based motherboard tuning applications. There is no need to choose between overclocking performance and stock stability, the Hyper 212 & TX3 EVO are a versatile pair that tailor noise and performance to any need.
Find the new legend, the Hyper 212 & TX3 EVO, at online and retail locations that sell your favorite Cooler Master, CM Storm, and Choiix products. They will be available in October 2011.
Cooler Master Announces CM Storm Trooper Premium Gaming Chassis
CM Storm, of the Cooler Master Group, unleashes a truly magnificent feat
of engineering into an arena that represents the future of warfare; the
Trooper full-tower chassis. Capable of lightning fast redeployment,
it’s the first in its class to include an ultra-strong carrying handle;
allowing a gamer to travel with the finest system configurations
available with relative ease. CM Storm Trooper includes features that
are most coveted by gaming enthusiasts in that it has full dust filter
coverage, a fan controller, an external SSD drive hot-swap dock and two
uniquely designed modular hard drive cages. These features give CM Storm
Trooper the ability to adapt to workstation or water-cooled gaming
configurations easily.
Cutting-edge Innovations
CM Storm Trooper exterior features a damage-resistant rubberized coating that will protect the case during transport. Things heat up as gaming becomes more intense. The included front panel connections and controls provide a user with the ability to make on-the-fly changes to fan speed and case LEDs while USB 3.0 and 2.0 ports, and audio connections are also provided as an added means of convenience. This is topped off by a 2.5” HDD/SSD X-dock that makes mounting extra drives as easy as loading a Blu-ray/DVD. Changing settings at a moment’s notice becomes a simple matter of a quick button press with CM Storm Trooper.
Versatile Configurations
CM Storm Trooper contains two modular HDD cages which can hold 4HDDs and a120mm fan for cooling each. These modular units can be rotated, front to back, side to side or removed altogether. CM Storm Trooper is the first chassis to allow fully modular hard drive configuration with no modification required. CM Storm Trooper can be equipped with multiple watercooling radiators.
Creatively mounting a vertical water-cooling radiator is possible with the removal of the hard drive cages and panels. CM Storm Trooper has nine expansion slots providing support for multi-GPUs in SLI or Crossfire, space for up to 14 hard drives, and a motherboard tray that supports up to XL-ATX. The Trooper is an ideal mobile arsenal to house and transport the most advanced system and cooling setups.
Cable Management & Storage
A professional cable management look is possible by utilizing the myriad cable tie zones and cable management holes available in the CM Storm Trooper. Smarter and larger placements of these areas allow for efficiently routing cables directly to their intended destinations. In an effort to reduce installation times, a great number of hardware can be mounted tool-free via the use of the included locking mechanisms or trays. A very large CPU heat sink retention hole has been placed in the motherboard tray to allow it to be compatible with most types of CPU and motherboard layouts. Prepare for the unexpected as seasoned operative would with a hidden drawer placed behind a false panel. The bottom panel removes to reveal a storage drawer to keep private effects safe from prying eyes until they are needed.
CM Storm will be launching CM Storm Trooper at a MSRP of 149€ in Europe. Expect to see it at retailers and online locations that sell your favorite Cooler Master, CM Storm, and Choiix gear by November 4th 2011 in Europe. Availability, and pricing will vary based on geographical region, please contact your local Cooler Master approved reseller or distributor in your country for more information.
Cutting-edge Innovations
CM Storm Trooper exterior features a damage-resistant rubberized coating that will protect the case during transport. Things heat up as gaming becomes more intense. The included front panel connections and controls provide a user with the ability to make on-the-fly changes to fan speed and case LEDs while USB 3.0 and 2.0 ports, and audio connections are also provided as an added means of convenience. This is topped off by a 2.5” HDD/SSD X-dock that makes mounting extra drives as easy as loading a Blu-ray/DVD. Changing settings at a moment’s notice becomes a simple matter of a quick button press with CM Storm Trooper.
Versatile Configurations
CM Storm Trooper contains two modular HDD cages which can hold 4HDDs and a120mm fan for cooling each. These modular units can be rotated, front to back, side to side or removed altogether. CM Storm Trooper is the first chassis to allow fully modular hard drive configuration with no modification required. CM Storm Trooper can be equipped with multiple watercooling radiators.
Creatively mounting a vertical water-cooling radiator is possible with the removal of the hard drive cages and panels. CM Storm Trooper has nine expansion slots providing support for multi-GPUs in SLI or Crossfire, space for up to 14 hard drives, and a motherboard tray that supports up to XL-ATX. The Trooper is an ideal mobile arsenal to house and transport the most advanced system and cooling setups.
Cable Management & Storage
A professional cable management look is possible by utilizing the myriad cable tie zones and cable management holes available in the CM Storm Trooper. Smarter and larger placements of these areas allow for efficiently routing cables directly to their intended destinations. In an effort to reduce installation times, a great number of hardware can be mounted tool-free via the use of the included locking mechanisms or trays. A very large CPU heat sink retention hole has been placed in the motherboard tray to allow it to be compatible with most types of CPU and motherboard layouts. Prepare for the unexpected as seasoned operative would with a hidden drawer placed behind a false panel. The bottom panel removes to reveal a storage drawer to keep private effects safe from prying eyes until they are needed.
CM Storm will be launching CM Storm Trooper at a MSRP of 149€ in Europe. Expect to see it at retailers and online locations that sell your favorite Cooler Master, CM Storm, and Choiix gear by November 4th 2011 in Europe. Availability, and pricing will vary based on geographical region, please contact your local Cooler Master approved reseller or distributor in your country for more information.
Monday, September 19, 2011
Thermaltake Introduces the Overseer RX-I eSports Chassis
Thermaltake, the leader and pioneer in PC thermal solutions, a worldwide
designer and supplier of high-performance components to the PC gaming
hardware market, with “delivering the perfect user experiences” as our
mission. The new Thermaltake Overseer RX-I e-Sports chassis’s global
market launch commences in mid-September. The most invaluable full-tower
chassis made for e-Sports fanatics to govern and benefit from all
valuable resources while in or out of the game. It is an unprecedented
e-Sports chassis that is designed for gaming purists looking for the
ultimate gaming performance, ensure true enjoyment.
Features of the Overseer RX-I e-Sports chassis include:
The exterior of the new Thermaltake Overseer RX-I e-Sports chassis continues the breathtaking design idiom, and prominent stylistic features include its six of 3.5” hard disk and three of 5.25” optical disk tool-free drivers’ bays with an e-Sports gaming design chassis. The chassis itself is armored with two exquisite front bezel and top bezels with a distinguishable breath light effect present a tender e-Sports gaming sensation to e-Sports fanatics. Moreover, an extra large interior room with full black coating, smart cable management and bottom-placed power supply unit design that not only offer the flexibility to support extended ATX motherboards and the most advanced AMD & NVIDIA graphic cards up to 12.5”/34cm long (i.e. AMD Radeon HD 6990 & NVIDIA Geforce GTX 590) but also gives an unify overall appearance from inside to outside of the chassis.
Extensive Compatibility and Expandability
The Overseer RX-I e-Sports chassis geared up with internal USB 3.0 SuperSpeed and top-mounted HDD docking station which enables blazing fast file transfer and effortless hot-swap capability. Furthermore, four heighten foot stands with excessive ventilation designs plus the detachable front, side and PSU dust filer provide an clean air flow with excellent internal environment, allow e-Sports fanatics to bolt through games and battles without any hiccup. Last but not least, reserved holes for liquid cooling system, offer the versatility for overclocking fanatics who wish to push performance to the limit.
No matter if you are just an ordinary e-Sports player or an extreme e-Sports fanatic, Thermaltake Overseer RX-I e-Sports chassis has all the abilities with affordable value to govern all your important resources that will boost your games to a whole new level!
For more information, visit the product page.
Features of the Overseer RX-I e-Sports chassis include:
- Distinguishable breath lighting effect
- Exquisite front bezel and black coating inside
- USB 3.0 SuperSpeed
- Top-mounted HDD Docking Station enables blazing fast file transfer and effortless hot-swap capability
- Bottom-placed PSU design for better and easier installation
- Supports most advanced AMD & NVIDIA graphics cards up to 12.5"/32 cm long
The exterior of the new Thermaltake Overseer RX-I e-Sports chassis continues the breathtaking design idiom, and prominent stylistic features include its six of 3.5” hard disk and three of 5.25” optical disk tool-free drivers’ bays with an e-Sports gaming design chassis. The chassis itself is armored with two exquisite front bezel and top bezels with a distinguishable breath light effect present a tender e-Sports gaming sensation to e-Sports fanatics. Moreover, an extra large interior room with full black coating, smart cable management and bottom-placed power supply unit design that not only offer the flexibility to support extended ATX motherboards and the most advanced AMD & NVIDIA graphic cards up to 12.5”/34cm long (i.e. AMD Radeon HD 6990 & NVIDIA Geforce GTX 590) but also gives an unify overall appearance from inside to outside of the chassis.
Extensive Compatibility and Expandability
The Overseer RX-I e-Sports chassis geared up with internal USB 3.0 SuperSpeed and top-mounted HDD docking station which enables blazing fast file transfer and effortless hot-swap capability. Furthermore, four heighten foot stands with excessive ventilation designs plus the detachable front, side and PSU dust filer provide an clean air flow with excellent internal environment, allow e-Sports fanatics to bolt through games and battles without any hiccup. Last but not least, reserved holes for liquid cooling system, offer the versatility for overclocking fanatics who wish to push performance to the limit.
No matter if you are just an ordinary e-Sports player or an extreme e-Sports fanatic, Thermaltake Overseer RX-I e-Sports chassis has all the abilities with affordable value to govern all your important resources that will boost your games to a whole new level!
For more information, visit the product page.
Intel Slip Up Discloses Core i7-2700K
A slip-up by Intel
revealed its next high-performance socket LGA1155 processor, the Core
i7-2700K. The box part product code of the new chip was disclosed in the
latest material deceleration datasheet (MDS) document, as
BX80623I72700K, carrying the spec code SR0DG. From the given product
code, one can deduce the SKU as Core i7-2700K. No other specifications
were given out, but given that Core i5 2000 and Core i7 2000 quad-core
models are spaced out in steps of 100 MHz, one can only guess that the
i7-2700K carries a clock speed of 3.50 GHz, with 3.90 GHz Turbo Boost.
In all likelihood, the release of this new chip could be timed to
coincide with AMD FX 8150, displacing the Core i7-2600K from its
existing price-point, and making the 2600K compete with the FX-8150 at a
more competitive price.
Source: CPU World
Source: CPU World
Razer to Design The Ultimate Arcade Stick for The XBOX 360 with The Community
Razer, the world leader in high performance
gaming hardware, just announced a program to co-develop the ultimate
arcade stick for the Xbox 360 together with the arcade stick community.
The arcade stick, developed with pro-gamer feedback, is currently at
the prototype stage. For the finishing touches, up to 200+ specially
selected top-seed Street Fighter IV pro-gamers, influential modders, and
members of the arcade enthusiast community will each be given a Razer
arcade stick to test and provide feedback to further improve it to
perfection, whereupon the final design will then proceed to production.
Since the company’s beginnings in ’98, Razer has continually taken pro-gamer feedback and validation during the product development phase to ensure that the design for every gaming product shipped is the absolute best for the competitive edge in tournament-grade play. But in an unprecedented move in the gaming hardware space, Razer is now reaching out to the entire arcade stick community to help make this yet-to-be-named product the best arcade stick in the world. Their feedback will be a huge influencing factor in the design of the final product.
“Razer is for gamers, by gamers. We’ve been taking feedback from our professional players on products for years and now we want to open it up to the community. That’s why we want every arcade enthusiast and modder’s input in the development of this special arcade stick,” said Robert “RazerGuy” Krakoff, President, Razer USA. “In this way, it’s not just our arcade stick; it’s the community’s arcade stick. Together, we will create a weapon that delivers the best fighting performance for every gamer and allows modding to the individual’s exact specifications. We’re not just asking people for input on the paint job, we’re after serious hardware feedback.”
Members of the arcade community worldwide interested in participating in this beta program are encouraged to contribute ideas at www.razerzone.com/bredtofight, along with a short description as to why they should be selected for prototype testing. Registrants can also nominate other people to the program. Up to 200+ successful applicants worldwide will receive an arcade stick prototype delivered directly to their homes.
Razer will be launching this non-retail arcade stick closed beta community program at Tokyo Game Show, the heart of the professional console fighting scene. Select pro-gamers and key modders will also be approached very soon to begin beta testing the prototype.
For more information on the arcade stick or the community program and how to get involved, please visit this page.
Please note, the pictures depict a preliminary design, the actual product may differ from what's shown in the pictures.
Since the company’s beginnings in ’98, Razer has continually taken pro-gamer feedback and validation during the product development phase to ensure that the design for every gaming product shipped is the absolute best for the competitive edge in tournament-grade play. But in an unprecedented move in the gaming hardware space, Razer is now reaching out to the entire arcade stick community to help make this yet-to-be-named product the best arcade stick in the world. Their feedback will be a huge influencing factor in the design of the final product.
“Razer is for gamers, by gamers. We’ve been taking feedback from our professional players on products for years and now we want to open it up to the community. That’s why we want every arcade enthusiast and modder’s input in the development of this special arcade stick,” said Robert “RazerGuy” Krakoff, President, Razer USA. “In this way, it’s not just our arcade stick; it’s the community’s arcade stick. Together, we will create a weapon that delivers the best fighting performance for every gamer and allows modding to the individual’s exact specifications. We’re not just asking people for input on the paint job, we’re after serious hardware feedback.”
Members of the arcade community worldwide interested in participating in this beta program are encouraged to contribute ideas at www.razerzone.com/bredtofight, along with a short description as to why they should be selected for prototype testing. Registrants can also nominate other people to the program. Up to 200+ successful applicants worldwide will receive an arcade stick prototype delivered directly to their homes.
Razer will be launching this non-retail arcade stick closed beta community program at Tokyo Game Show, the heart of the professional console fighting scene. Select pro-gamers and key modders will also be approached very soon to begin beta testing the prototype.
For more information on the arcade stick or the community program and how to get involved, please visit this page.
Please note, the pictures depict a preliminary design, the actual product may differ from what's shown in the pictures.
NZXT Rolls Out New High-End Tempest 210 Mid-Tower Case
NZXT has introduced another Crafted Series gaming PC chassis, the
mid-tower Tempest 210 which promises great airflow and easy cable
management. Coated, unusually, in black cloth inside and out, it has a
full mesh front panel, three exposed 5.25-inch bays and a full eight
3.5-inch internal bays, all of which use convenient tool-free mountings.
The I/O panel has USB connectors (one each of USB 3.0 and USB 2.0) and
standard audio connectors. Cooling is looked after by two per-installed
fans, a 120mm at the rear and a 140mm on top. The new Tempest 210 gaming
case costs $54.99
Source: TechConnect Magazine
Source: TechConnect Magazine
Corsair Announces New Vengeance Gaming Keyboards and Laser Gaming Mice
Corsair, a worldwide designer and supplier of high-performance
components to the PC gaming hardware market, today announced their new
line of Vengeance PC gaming peripherals, including two gaming keyboards
and two laser gaming mice.
"Corsair has built a reputation for developing innovative products that focus on the unique needs of our customers," said Andy Paul, Corsair's President and CEO. "Our new Vengeance keyboards and mice follow in that tradition. PC gamers will love their gorgeous design and attention to the smallest details, like the intelligently designed button layout on our mice or the specially shaped WASD keycaps on our keyboard."
Corsair's new PC gaming peripherals line includes four new HID products: The Vengeance K60 and Vengeance K90 gaming keyboards and the Vengeance M60 and Vengeance M90 gaming mice. A key feature of all four of these new Vengeance Series products is the use of an aluminum structure to provide strength and durability, as well as a stunning industrial design.
"As enthusiastic gamers ourselves, we've developed precisely the products we always wanted, with a level of quality we have not seen before," said Ruben Mookerjee, VP and General Manager
of the Components Business Unit at Corsair. "We're confident that our
Vengeance gaming keyboards and mice will give you a competitive edge.
Whether you prefer the immersion and intensity of MMO and RTS, or the
adrenaline-fueled combat of FPS, our goal is to help you win."
Vengeance K60 and M60: Designed For First-Person Shooters
The Vengeance K60 gaming keyboard and the Vengeance M60 laser gaming mouse are designed for PC Gamers who specialize in First-Person Shooters (FPS). The Vengeance K60 keyboard features the predictable linear response and light touch of Cherry MX Red mechanical key switches for more agile movement and faster multi-taps. The contoured left-wrist rest plus shaped and textured WASD key caps increase comfort, even during extended gaming sessions. The K60 uses an advanced key matrix design that delivers complete anti-ghosting so no keystrokes are missed. Unlike other USB gaming keyboards that are limited to the USB-standard 6-key rollover, the K60 features a 20-key rollover and a blazing fast 1ms reporting rate (1000 reports per second).
The Vengeance M60 mouse features an enthusiast-grade Avago 5700 DPI sensor with on-the-fly resolution switching, an aluminum unibody design with adjustable center of gravity, programmable lift detection, a high-mass scroll wheel, and PTFE glide pads. A key innovation of the M60 mouse is the Sniper button, allowing an instant toggle from fast movement, high DPI-resolution mode down to a high-precision mode for more accurate aiming.
Vengeance K90 and Vengeance M90: Designed For MMO and RTS Gaming
The Vengeance K90 gaming keyboard and M90 laser gaming mouse are optimized to meet the unique needs of MMO and RTS gaming. The Vengeance K90 keyboard also features Cherry MX Red key switches, full anti-ghosting, 20-key rollover, 1ms reporting rate, and each key is individually backlit with a cool blue LED that can be adjusted to three different levels of intensity. The K90 also includes 18 dedicated macro keys that can be programmed either through software or on the fly, and with three user-selectable banks of macros you have a total of 54 independent macros available at any time. Your macros are stored in flash memory on the keyboard so you'll be able to bring them with you wherever your gaming takes you.
The Vengeance M90 gaming mouse features 15 fully programmable buttons, arranged and tuned for intuitive operation without compromising your grip, and on-board flash memory lets you save your macros in up to six profiles that can be switched on-the-fly. An Avago 5700 DPI sensor allows on-the-fly resolution adjustment and the programmable lift detection, high-mass scroll wheel, and PTFE glide pads ensure swift, precise movement. The intuitive Windows-based Vengeance software utility lets you manage your macro keys, on-board profiles, and sensor settings so you can customize your M90 to exactly match your gaming style.
Pricing and Availability
The Vengeance K90 gaming keyboard has an MSRP in the United States of $129 and the K60 has an MSRP of $109. The Vengeance M90 gaming mouse has an MSRP of $79 and the M60 has an MSRP of $69.
The full range of Vengeance gaming peripherals are expected to be available in October 2011 from authorized Corsair retailers and etailers worldwide. For more information, visit the product pages.
"Corsair has built a reputation for developing innovative products that focus on the unique needs of our customers," said Andy Paul, Corsair's President and CEO. "Our new Vengeance keyboards and mice follow in that tradition. PC gamers will love their gorgeous design and attention to the smallest details, like the intelligently designed button layout on our mice or the specially shaped WASD keycaps on our keyboard."
Corsair's new PC gaming peripherals line includes four new HID products: The Vengeance K60 and Vengeance K90 gaming keyboards and the Vengeance M60 and Vengeance M90 gaming mice. A key feature of all four of these new Vengeance Series products is the use of an aluminum structure to provide strength and durability, as well as a stunning industrial design.
"As enthusiastic gamers ourselves, we've developed precisely the products we always wanted, with a level of quality we have not seen before," said Ruben Mookerjee, VP and General Manager
Vengeance K60 and M60: Designed For First-Person Shooters
The Vengeance K60 gaming keyboard and the Vengeance M60 laser gaming mouse are designed for PC Gamers who specialize in First-Person Shooters (FPS). The Vengeance K60 keyboard features the predictable linear response and light touch of Cherry MX Red mechanical key switches for more agile movement and faster multi-taps. The contoured left-wrist rest plus shaped and textured WASD key caps increase comfort, even during extended gaming sessions. The K60 uses an advanced key matrix design that delivers complete anti-ghosting so no keystrokes are missed. Unlike other USB gaming keyboards that are limited to the USB-standard 6-key rollover, the K60 features a 20-key rollover and a blazing fast 1ms reporting rate (1000 reports per second).
The Vengeance M60 mouse features an enthusiast-grade Avago 5700 DPI sensor with on-the-fly resolution switching, an aluminum unibody design with adjustable center of gravity, programmable lift detection, a high-mass scroll wheel, and PTFE glide pads. A key innovation of the M60 mouse is the Sniper button, allowing an instant toggle from fast movement, high DPI-resolution mode down to a high-precision mode for more accurate aiming.
Vengeance K90 and Vengeance M90: Designed For MMO and RTS Gaming
The Vengeance K90 gaming keyboard and M90 laser gaming mouse are optimized to meet the unique needs of MMO and RTS gaming. The Vengeance K90 keyboard also features Cherry MX Red key switches, full anti-ghosting, 20-key rollover, 1ms reporting rate, and each key is individually backlit with a cool blue LED that can be adjusted to three different levels of intensity. The K90 also includes 18 dedicated macro keys that can be programmed either through software or on the fly, and with three user-selectable banks of macros you have a total of 54 independent macros available at any time. Your macros are stored in flash memory on the keyboard so you'll be able to bring them with you wherever your gaming takes you.
The Vengeance M90 gaming mouse features 15 fully programmable buttons, arranged and tuned for intuitive operation without compromising your grip, and on-board flash memory lets you save your macros in up to six profiles that can be switched on-the-fly. An Avago 5700 DPI sensor allows on-the-fly resolution adjustment and the programmable lift detection, high-mass scroll wheel, and PTFE glide pads ensure swift, precise movement. The intuitive Windows-based Vengeance software utility lets you manage your macro keys, on-board profiles, and sensor settings so you can customize your M90 to exactly match your gaming style.
Pricing and Availability
The Vengeance K90 gaming keyboard has an MSRP in the United States of $129 and the K60 has an MSRP of $109. The Vengeance M90 gaming mouse has an MSRP of $79 and the M60 has an MSRP of $69.
The full range of Vengeance gaming peripherals are expected to be available in October 2011 from authorized Corsair retailers and etailers worldwide. For more information, visit the product pages.
Subscribe to:
Posts (Atom)